原装货源渠道，欧美一手供应SAUTER温湿度开关HBC111F001

通过控制风扇，干燥单元和空气加湿器对相对湿度的监视和调节•温度补偿的湿度传感器•基于％RH的印刷量表的可变相对湿度作为设定点的可变相对湿度•包括用密封或壁壁安装的固定支架•用于在墙壁上或墙壁上安装•与单杆更换式接触型和固定固定的固定切换量•XSD•XSD•XSD差异为13杆•XSD•XSD较高13秒•XSD•XSD差异为15秒•XSD较高13秒。包括固定支架

Monitoring and regulation of relative humidity by controlling fans, drying units and air humidifiers
• Temperature-compensated humidity sensor
• Variable relative humidity as setpoint based on printed scale in % rh
• Includes fixing bracket with seal for duct or wall mounting
• For fitting in a ventilation duct or on a wall
• With single-pole change-over contacts and fixed switching difference Xsd
• Immersion depth 130...156 mm; includes fixing bracket

电源最大负载5（3）A，250 v〜min。负载100 mA，24 V参数设置范围15 ... 95％RH设置精度±5％RH湿度校准在55％RH，23°C温度影响赔偿的长期稳定性–1.5％rh/a在移动空气中的时间常数（0.2 m/s）。 3分钟开关差XSD XSD 4％RH（湿度校准后）最大。空速10 m/s

Power supply
Max. load 5(3) A, 250 V~
Min. load 100 mA, 24 V
Parameters
Setting range 15...95% rh
Setting accuracy ±5% rh
Humidity calibration at 55% rh, 23 °C
Temperature influence Compensated
Long-term stability –1.5% rh/a
Time constant in moving air (0.2 m/s) Approx. 3 minutes
Switching difference Xsd 4% rh (after humidity calibration)
Max. air speed 10 m/s